PMW SWAB Specification
| PMW SWAB | Length | Weight | Material | Sterile | |
| NP1 | Body | 85mm 5mm | 1.5g | Acetal | EGO Gas |
| Head | 15mm 5mm | 1.5g | Nylon66 | EGO Gas | |
| Total Length | 150mm 5mm | 1.5g | (Acetal+Nylon66) | EGO Gas | |
| OP2 | Body | 85mm 5mm | 1.6g | Acetal | EGO Gas |
| Head | 20mm 5mm | 1.6g | Nylon66 | EGO Gas | |
| Total Length | 150mm 5mm | 1.6g | (Acetal+Nylon66) | EGO Gas | |
| NP1(Nasopharyngeal) | OP2(Oropharyngeal |
 |
 |
| PMW-SWAB NP1 |
 |
| PMW-SWAB OP2 |
 |
| PMW-SWAB DUAL |
 |
Specification
1)Head: The part where sample are collected. 2)Body: The handle part where samples are collected.
| [PMW CONTROL SWAB] |
 |
Unit: mm, Error Range: +/- 5mm
| Model | Head | Body | Total Length | Etc |
| PMW CONTROL SWAB | 15 | 60 | 75 | NASAL, ORAL |
| [PMW CONTROL SWAB L15] |
|
Unit: mm, Error Range: +/- 5mm
| Model | Head | Body | Total Length | Etc |
| PMW CONTROL SWAB L15 | 15 | 135 | 150 | NASAL |
[Ingredients]
| Head | Polyurethane |
| Body | PP |
Photos by Swab Type after extraction
* These photos depict the robustness testing of the swab's head portion, allowing you to observe whether the head remains intact after absorption. If the head is not intact, it is possible for the material composing the head to be present in the diagnostic solution. In other words, there may be some substance in the solution.
Average OD value
